Sorry for late response, here it is. I have a gut feeling that it's a simple manual entry to allow for the switch I need and am hoping you have one.
; OPROFILE INI file for Exchange Server and/or IMO users
; -------------------------------------------
; Copyright (c) 1997-2004 Imanami Corporation. All rights reserved.
; http://www.imanami.com
;
; Profile: Profile Template for Outlook Profile Generator Version 4.6
;
; Variables supported:
; %WINDRV% - Windows Drive
; %WINDIR% - Windows Directory
; %PROFILE% - Windows Profile Directory
; %USERNAME% - The User's Name
; %OPDIR% - OProfile Directory
; OProfile 4.6 supports all system environment variables too
;
; If a directory does not exist OProfile will create it.
;
; This is the configuration file for OProfile
; This file must be in the same directory as OProfile
; ************************************************************************
; Section 1 - Profile defaults.
;
[OPROFILE]
;Your license information goes here
LicenseNumber=xxxxx
LicenseKey=Imanami
;Outlook mode
; IMO - Internet Mail Only
; Corporate - Exchange, POP3 and other services are all available
OutlookMode=IMO
;Check whether or not the OutlookMode setting matches the installed services
CheckOutlookMode=TRUE
;OProfile modes of operation
; Normal - Default OProfile behavior
; Org2Org - Exchange Organization to Exchange Organization Migration
; Commandeer - Use existing default profile
Mode=Normal
;Use Cached Exchange Mode. No effect if Outlook version is lower than that of Outlook 2003.
;EnableCachedMode=TRUE
;Used to set the editor for messages
; 00030002 - Outlook Rich Text
; 00020000 - HTML
; 00010000 - Plain Text
; 00030001 - Outlook Rich Text - Word
; 00020001 - HTML - Word
; 00010001 - Plain Text - Word
EditorPreference=00020000
;Used to decide whether to write a new profile if one exits
;Use 0 to disable
OProfileVersionStamp=0
;Set this profile as the default profile
SetAsDefault=TRUE
;If TRUE, Outlook prompts the user to logon when it launches
;If FALSE, Outlook uses current credentials to logon.
;If LogonDomain is empty, the current domain will be used.
PromptToLogon=FALSE
LogonDomain=
;If TRUE, OProfile prompts the user for the username.
;If FALSE, OProfile uses the mailboxname specified in the [Service2] section
;This is a convenient way for the user to specify a username other than their NT username
PromptForUsername=FALSE
;If true, OProfile shows the last username entered. Default is true.
;ShowUserNameInPrompts=True
;This setting works in combination with PromptForUsername:
; When PromptForUsername=FALSE, PromptForUsernameAlways is ignored,
; When PromptForUsername=TRUE, and PromptForUsernameAlways=TRUE
; Oprofile prompts for the username every time it runs
; When PromptForUsername=TRUE, and PromptForUsernameAlways=FALSE
; Oprofile only prompts for the username the first time it runs
PromptForUsernameAlways=TRUE
;If ALWAYS, Outlook prompts the user to select a profile when it launches
;If NEVER, Outlook uses default profile without showing a dialog box.
;If WIN95, Outlook prompts when the OS is Win95/98/ME
PromptForProfile=NEVER
;If TURE, automatically detect the connection state
;If FALSE, manually detect the connection state
AutoDetectConnectionState=TRUE
;When AutoDetectConnectionState is FALSE, prompt the user to choose connection state if TRUE
;When AutoDetectConnectionState is TRUE, this setting is ignored.
;When both AutoDetectConnectionState and this setting are FALSE, Outlook always connects using existing connection
PromptForConnectionState=TRUE
;If NEVER, disable offline use
;If ALWAYS, enable offline use
;If PROMPT, ask the user
OST=NEVER
ErrorIfNoOutlook=FALSE
;Stop those annoying sample items
CreateSamples=FALSE
;Disable Office Assistant
DisableAssistant=TRUE
;Disable OST (Offline use) - this prohibits OST creation period.
NoOst=False
;Disable PST (Personal folders) - this prohibits PST creation period.
NoPst=False
;Delete the installed PST service
KillPst=False
;This will force PST files to be created in the specified path.
;See MSQB Q266255
;
;ForcePSTPath=
;Disable Instant Messaging
DisableIM=TRUE
;Enable/Disable journaling button on Outlook Bar
EnableJournal=FALSE
;If a user does not login in Windows 9X OProfile generates this error to
;avoid creating a bogus profile. This setting controls whether an error
;is displayed. Regardless of this setting, OProfile exits.
ErrorIfNotLoggedOn=TRUE
;URL to OUTLOOK Today
OutlookTodayURL=<Default>
;This will run a command after OProfile runs everytime a user logs in.
;Note: any command must be of the form oprofile.* or OPSetup will not copy it during setup.
;Here are some examples:
;RunEverytimeCommand=rundll32 setupapi,InstallHinfSection DefaultInstall 128 "%OPDIR%\oprofile.inf
;RunEverytimeCommand=%OPDIR%\oprofile.bat
;This will run a command after a OProfile creates a Profile.
;Note: any command must be of the form oprofile.* or OPSetup will not copy it during setup.
;Here are some examples:
;
;RunPerProfileCommand=rundll32 setupapi,InstallHinfSection DefaultInstall 128 "%OPDIR%\oprofile.inf"
;RunPerProfileCommand="%OPDIR%\oprofile.bat"
;This will import a registry file after a OProfile creates a Profile.
;ImportRegFileOnProfile=
;This will import a registry file after OProfile runs everytime a user logs in.
;ImportRegFileAlways=
;This will launch Outlook after OProfile
LaunchOutlook=TRUE
;Command line switches to pass to Outlook. For example: /CleanFreeBusy and/or /CleanViews (recommended for inter-org migration only)
;LaunchOutlookCommandLine=
;This will add the Exchange 2000 conferencing service to the list of on-line meeting applications.
Exchange2000Conferencing=FALSE
;Specify whether or not define a send/receive group. Only works in Outlook 2002
DefineSendAndReceiveGroup=FALSE
;Specify whether or not to show the Outlook Bar
ShowOutlookBar=TRUE
;Specify whether or not to show the Folder List
ShowFolderList=FALSE
;Use the following text to prompt for the username
;PromptForUsernameWith=
;Use the following text to prompt for the connection
;PromptForConnectionWith=
;If true, OProfile deletes the Outlook favorites (Outlook bar) file when in Org2Org mode.. Default is true.
;DeleteFavoritesFileDuringMigration=True
;If true, OProfile deletes the Outlook rules file when in Org2Org mode.. Default is true.
;DeleteRulesFileDuringMigration=True
;If true, OProfile deletes the Outlook offline address book files when in Org2Org mode. Default is true.
;DeleteOABFilesDuringMigration=True
;If true, OProfile deletes the Outlook nickname files when in Org2Org mode.. Default is true.
;DeleteNickNameFilesDuringMigration=True
;Specify the default template
OPAWTemplate=Default
;OPROFILE Version number
OPVersion=4.6
AuthorizedMailboxNames=
LastModified=5/21/2008 - 6:21 PM
DeploymentMethod=network file server
[Hosts]
;localhost=127.0.0.1
[Send/Receive Group]
;Calender,Contacts,Deleted Items,Drafts,Inbox,Journal,Notes,Outbox,Sent Items,Tasks
;Folders to include in send/receive=Inbox,Outbox,Sent Items,Deleted Items
IncludeWhenOnline=TRUE
UponExitWhenOnline=FALSE
AutomaticWhenOnline=TRUE
IntervalWhenOnline=10
IncludeWhenOffline=TRUE
AutomaticWhenOffline=TRUE
IntervalWhenOffline=30
[General]
Custom=1
ProfileName=%USERNAME% - Company
OverwriteProfile=FALSE
DeleteAllOtherProfiles=FALSE
DefaultStore=Service2
;Applies only to Org2Org mode. If set to true, OProfile backups the default profile before making changes to it. Default value is false.
;BackupProfile=True
;Applies only to Org2Org mode. Name to call the backup profile. The default is "Backup-%OLDPROFILENAME%-%NOW%"
;BackupProfileName=
; ************************************************************************
; Section 2 - Services in profile.
[Service List]
Service1=Microsoft Outlook Client
Service2=Microsoft Exchange Server
Service3=Outlook Address Book
Service4=Dialup Networking
Service5=
Service6=
IMAPService1=IMAP E-mail
; ************************************************************************
; Section 3 - Default values for each service.
[Service1]
ConfirmOnDelete=FALSE
EmptyWastebasket=FALSE
AfterMoveMessage=2
CloseOriginalMessage=TRUE
GenReadReceipt=FALSE
GenDeliveryReceipt=FALSE
DefaultSensitivity=0
DefaultPriority=1
SaveSentMail=TRUE
DefaultFolderOnOpen=IPF.Note
;------When Mail Arrives-------
ChangePointerOnNewMail=TRUE
NotifyWithDialogOnNewMail=FALSE
PlaySoundWhenNewMail=FALSE
;----Outlook AutoArchive------
AutoArchivePSTPath=%PROFILE%\%USERNAME%_archive.pst
DeleteExpiredMessages=FALSE
DoAutoArchive=FALSE
DoReminder=True
NumberOfDaysforAutoArchive=30
PromptforAutoArchive=FALSE
AutoArchive=TRUE
;Number of months to publish free/busy information
FBPublish=3
;-----Outlook pre-defined groups
OutlookBarDefaultGroups=OutlookGroup,MailGroup,OtherGroup
;-----User defined Outlook Bar groups-----
;-----Each group appears on the Outlook bar in the same order as they are specified here
;OutlookBarUserGroups=My Favorites,Others
OutlookBarUserGroups=
;-----The name of the default address book
;-----If this entry is empty, Global address list is used.
;
;-----Examples:
;-----DefaultAddressBook=All Users
;-----DefaultAddressBook=All Contacts
DefaultAddressBook=
;-----Set AttachmentSafety to None or High
;AttachmentSafety=High
[Service2]
EncryptionConfigFlags=4
ConversionProhibited=TRUE
;this setting is ignored if the version of Outlook is higher than 10,
;as it would prevent this service from being configured when Outlook 11 is installed.
MailboxName==%USERNAME%
HomeServer=<exchange server>
; Required.
; -- The name of the Microsoft Exchange Server the user should
; connect to. You can specify any Microsoft Exchange Server
; in your site, and the correct Home Server will be assigned
; when the user first logs on.
UseExistingConnection=TRUE
EncryptNetwork=FALSE
EncryptDialup=FALSE
OfflineFolderPath=%PROFILE%\%USERNAME%.ost
;Additional mailboxes separated by comma
AdditionalMailboxes=
;Transport list order
;All available transport providers must be included in the list
;TransportOrder=Microsoft Exchange Remote Transport,Microsoft Exchange Transport
[Service3]
Ben=TRUE
; -- Dummy property. Do not delete or modify.
[Service4]
DialConnection=FALSE
;The following settings can be used when DialConnection is TRUE
;UserName=%USERNAME%
;DomainName=<domain name>
;Password=
;ConnectionName=<connection name>
; ************************************************************************
; Section 4 - Mapping for profile properties. DO NOT MODIFY.
; ************************************************************************
; Microsoft Outlook Client definitions
[Microsoft Outlook Client]
SectionGUID=0a0d020000000000c000000000000046
AttachmentSafety=PT_STRING8,0x0000,Outlook\Options\General,AttachmentSafety
ConfirmOnDelete=PT_BOOLEAN,0x0111,Outlook\Options\General,WarnDelete
; -- A boolean value indicating whether or not to prompt before
; deleting items
EmptyWastebasket=PT_BOOLEAN,0x0115,Outlook\Preferences,EmptyTrash
; -- A boolean value indicating whether or not to empty the
; wastebasket on exit.
SelectEntireWord=PT_BOOLEAN,0x0118
; -- A boolean value indicating whether or not to select entire
; words when selecting.
AfterMoveMessage=PT_LONG,0x013B,Outlook\Preferences,AfterMove
; -- Indicates what to do after moving or deleting a message.
; Possible values are shown below:
; 0 - Open Next Message
; 1 - Return to Viewer
; 2 - Open Previous Message
CloseOriginalMessage=PT_BOOLEAN,0x0132,Outlook\Preferences,CloseOrig
; -- A boolean value indicating whether or not to close the
; original message after replying.
GenReadReceipt=PT_BOOLEAN,0x0141,Outlook\Preferences,ReadReceipt
; -- A boolean value indicating whether or not to generate
; a read receipt on sent mail.
GenDeliveryReceipt=PT_BOOLEAN,0x014C,Outlook\Preferences,DeliveryReceipt
; -- A boolean value indicating whether or not to generate
; a delivery receipt on sent mail.
DefaultSensitivity=PT_LONG,0x014F,Outlook\Preferences,Sensitivity
; -- The default sensitivity to send mail with.
; Possible values are shown below:
; 0 - Normal
; 1 - Personal
; 2 - Private
; 3 - Confidential
DefaultPriority=PT_LONG,0x0140,Outlook\Preferences,Importance
; -- The default priority to send mail with.
; Possible values are shown below:
; 0 - Low
; 1 - Normal
; 2 - High
SaveSentMail=PT_BOOLEAN,0x0142,Outlook\Preferences,SaveSent
; -- A boolean value indicating whether to save a copy of
; sent messages in the sent items folder.
DoReminder=PT_BOOLEAN,0x0000,Outlook\Preferences,ApptReminders
; -- A boolean value indicating whether to do reminder
DoAutoArchive=PT_BOOLEAN,0x0320,Outlook\Preferences,DoAging
; -- A value indicating whether or not to use the Outlook AutoArchive feature
PromptForAutoArchive=PT_BOOLEAN,0x0321,Outlook\Preferences,PromptForAging
; -- A value indicating whether or not to prompt when time for AutoArchive
PromptWhenUsingWebServices=PT_BOOLEAN,0x0273
;
DeleteExpiredMessages=PT_BOOLEAN,0x0322
; -- A value indicating whether or not to delete expired messages in the folder
NumberOfDaysForAutoArchive=PT_LONG,0x0323,Outlook\Preferences,EveryDays
; -- Indicates the number of days between AutoArchiving.
;Number of months to publish free/busy information
FBPublish=PT_LONG,0x0330,Outlook\Preferences,FBPublishRange
OpenWithWebServices=PT_BOOLEAN,0x0274
;
AutoArchivePSTPath=PT_STRING8,0x0324
; -- A string representing the path to the autoArchive file.
PlaySoundWhenNewMail=PT_BOOLEAN,0x023E,Outlook\Preferences,PlaySound
; -- A boolean value indicating whether or not to play a sound when new mail arrives
ChangePointerOnNewMail=PT_BOOLEAN,0x023F,Outlook\Preferences,ChangePointer
; -- A boolean value indicating whether or not to change the mouse cursor on new mail
NotifyWithDialogOnNewMail=PT_BOOLEAN,0x0240,Outlook\Preferences,Notification
; -- A boolean value indicating whether or not to show a dialog when new mail arrives.
DefaultFolderOnOpen=PT_STRING8,0x0336
; -- Folder to show on open
; Possible values are shown below:
; IPF.TodaysOutlook - Outlook Today
; IPF.Note - Inbox
; IPF.Appointment - Calendar
; ************************************************************************
; Microsoft Exchange Server service definitions.
[Microsoft Exchange Server]
ServiceName=MSEMS
MDBGUID=5494A1C0297F101BA58708002B2A2517
MailboxName=PT_STRING8,0x6607
; -- The name of the user's Exchange Server Mailbox
HomeServer=PT_STRING8,0x6608
; -- The name of the Microsoft Exchange Server the user should
; connect to. You can specify any Microsoft Exchange Server
; in your site, and the correct Home Server will be assigned
; when the user first logs on.
OfflineFolderPath=PT_STRING8,0x6610
; -- The path to the Offline Store File that contains
; local replicas of the user's Mailbox and Favorites.
; If you do not specify a value, no Offline Store will
; be created. If you specify a path, an Offline Store
; will be created and the Inbox, Outbox, Deleted Items,
; and Sent Items folders will be replicated to it.
OfflineAddressBookPath=PT_STRING8,0x660E
; -- The path to the directory to store offline address
; book files in.
EncryptionConfigFlags=PT_LONG,0x6606
;Encryption
ExchangeConfigFlags=PT_LONG,0x6601
; -- Flags that control behavior when connecting to the Exchange
; Server.
; The following values are possible:
; VALUE RESULT
; 4 Normal
; 6 Ask whether to connect or work offline at startup.
; 12 Allow clients to be authenticated via the Internet
; 14 Combination of 6 and 12.
ConversionProhibited=PT_BOOLEAN,0x3A03
; -- A boolean value indicating whether NEWPROF should
; attempt to resolve the Exchange mailbox name at run time.
; If set to TRUE, NEWPROF will copy the name to the profile
; without resolving it.
; If FALSE, the name will be resolved. Invalid server or
; mailbox name will not be copied to the profile.
UseExistingConnection=PT_BOOLEAN,0x6717
; -- A boolean value indicating whether NEWPROF should
; attempt to resolve the Exchange mailbox name at run time.
; If set to TRUE, NEWPROF will copy the name to the profile
; without resolving it.
; If FALSE, the name will be resolved. Invalid server or
; mailbox name will not be copied to the profile.
; ************************************************************************
; Microsoft Mail service definitions.
[Microsoft Mail]
ServiceName=MSFS
; -- The path to the users post office. Mapped network drives, UNC and NETWARE paths
; are acceptable. NETWARE paths of the type NWServer/share:dir\dir1 are converted to
; UNC paths of the type \\NWServer\share\dir\dir1.
ServerPath=PT_STRING8,0x6600
; -- The users mailbox name. eg. in a NET/PO/USER address,
; this is USER. The maximum mailbox name is 10 characters.
Mailbox=PT_STRING8,0x6601
; -- The users mailbox password. The maximum password is 8 characters.
Password=PT_STRING8,0x67f0
; -- A boolean value indicating whether the users password is
; to be remembered in the profile or not. This is useful because
; if the password is remembered the user can bypass the logon prompt
; if his server path, mailbox name and password are all supplied.
RememberPassword=PT_BOOLEAN,0x6606
; -- The connection type. This may be one of CFG_CONN_AUTO, CFG_CONN_LAN,
; CFG_CONN_REMOTE, CFG_CONN_OFFLINE as defined below.
;
; 0x0 -- LAN type connection. Used to connect to the post office using a
; UNC path or pre-existing mapped drive.
; 0x1 -- Dial up connection using Dial-up Networking.
; 0x2 -- Not connected.
; 0x3 -- Automatically detect whether the connection type is LAN or REMOTE.
; This connection type is only available on Win95.
ConnectionType=PT_LONG,0x6603
; -- A boolean value indicating whether session logging
; is on or off.
UseSessionLog=PT_BOOLEAN,0x6604
; -- The path to the session log file.
SessionLogPath=PT_STRING8,0x6605
; -- A boolean value which indicates whether mail in the outbox
; is sent.
EnableUpload=PT_BOOLEAN,0x6620
; -- A boolean value which indicates whether mail in the server
; mailbag is downloaded.
EnableDownload=PT_BOOLEAN,0x6621
; -- A bit array which allows the user to indicate which addresses
; for which the transport is to attempt delivery. This is useful
; in order to allow a user to specify that a transport only handle
; delivery for a subset of the addresses it can really process.
; When multiple transports are installed and the user wants a
; different transport to handle some specific address types they
; can use this bit array to specify that the MSMAIL transport
; only handle a specific set of addresses.
;
; Possible values as defined below include:
;
; 0x00000001 -- Local Post Office and External Post Office address types
; 0x00000002 -- PROFS address types
; 0x00000004 -- SNADS address types
; 0x00000008 -- MCI address types
; 0x00000010 -- X.400 address types
; 0x00000040 -- FAX address types
; 0x00000080 -- MHS address types
; 0x00000100 -- SMTP address types
; 0x00000800 -- OfficeVision address types
; 0x00001000 -- MacMail address types
; 0x000019df -- All of the above address types
UploadMask=PT_LONG,0x6622
; -- A boolean value which indicates whether a netbios notification
; is sent to a recipients transport when mail is delivered to
; their server inbox.
NetBiosNotification=PT_BOOLEAN,0x6623
; -- The polling interval in minutes when the transport
; checks for new mail. 1 <=polling interval <= 9999
NewMailPollInterval=PT_STRING8,0x6624
; -- A boolean value which, if TRUE, only displays the Microsoft Mail Global Address
; list for name selection. The Postoffice list, external post office lists, and gateway
; address lists are not shown.
DisplayGalOnly=PT_BOOLEAN,0x6625
; -- A boolean value which indicates whether the user wants to enable
; headers while working on the LAN. Headers mode allows the user
; to download message headers and selectively choose which mail
; to download.
UseHeadersOnLAN=PT_BOOLEAN,0x6630
; -- A boolean value which indicates whether the user wants to use
; name resolution based on a local copy of the server address book
; rather than the server address book itself.
UseLocalAdressBookOnLAN=PT_BOOLEAN,0x6631
; -- A boolean value which indicates whether EXTERNAL.EXE, a server process, should be used
; to deliver submitted mail messages. This is sometimes useful when mail is running
; on a slow LAN connection.
UseExternalToHelpDeliverOnLAN=PT_BOOLEAN,0x6632
; -- A boolean value which indicates whether the user wants to enable
; headers while working over a slow speed link. Headers mode
; allows the user to download message headers and selectively
; choose which mail to download.
UseHeadersOnRAS=PT_BOOLEAN,0x6640
; -- A boolean value which indicates whether the user wants to use
; name resolution based on a local copy of the server address book
; rather than the server address book itself.
UseLocalAdressBookOnRAS=PT_BOOLEAN,0x6641
; -- A boolean value which indicates whether EXTERNAL.EXE, a server process, should be used
; to deliver submitted mail messages. This speeds up message delivery when mail is
; running on a Dial-up network connection.
UseExternalToHelpDeliverOnRAS=PT_BOOLEAN,0x6639
; -- A boolean value which indicates that a Dial-up Network connection should
; be established when the transport provider starts up.
ConnectOnStartup=PT_BOOLEAN,0x6642
; -- A boolean value which indicates that a Dial-up Network connection should
; be automatically terminated when headers are finished downloading.
DisconnectAfterRetrieveHeaders=PT_BOOLEAN,0x6643
; -- A boolean value which indicates that a Dial-up Network connection should
; be automatically terminated after mail has finished being sent
; received.
DisconnectAfterRetrieveMail=PT_BOOLEAN,0x6644
; -- A boolean value which indicates that a Dial-up Network connection should
; be automatically terminated when the provider is exited.
DisconnectOnExit=PT_BOOLEAN,0x6645
; -- The name of the Dial-up Network profile that the transport will use by
; default to attempt the connection.
DefaultDialupConnectionName=PT_STRING8,0x6646
; -- Number of times to attempt dial for connection.
; 1 <=retry attempts <= 9999
DialupRetryCount=PT_STRING8,0x6648
; -- Delay between retry attempts in seconds.
; 30 <=retry delay <= 9999
DialupRetryDelay=PT_STRING8,0x6649
; ************************************************************************
; Personal Folders service definitions.
[Personal Folders]
ServiceName=MSPST MS
; -- Path to personal folders.
PathToPersonalFolders=PT_STRING8,0x6700
; -- A boolean value that determines if the personal folders password
; should be cached.
RememberPassword=PT_BOOLEAN,0x6701
; -- A value that designates the type of encryption that is used to
; compress the data in the PST:
;
; No Encryption 0x80000000
; Compressable Encryption 0x40000000
; Best Encryption 0x20000000
EncryptionType=PT_LONG,0x6702
; -- PST password.
Password=PT_STRING8,0x6703
; ************************************************************************
; Personal Address Book service definitions.
[Personal Address Book]
ServiceName=MSPST AB
; -- Path to personal address book.
PathToPersonalAddressBook=PT_STRING8,0x6600
; -- Determines if PAB entries are first, last, or last, first.
;
; first last 0
; last, first 1
ViewOrder=PT_LONG,0x6601
; ************************************************************************
; Outlook Address Book service definitions.
[Outlook Address Book]
ServiceName=CONTAB
Ben=PT_STRING8,0x6700
; -- Dummy property. Do not modify.
; ************************************************************************
; Outlook Client RAS definitions by Imanami Corporation
[Dialup Networking]
SectionGUID=5acf76a3665511cea39a00aa004acafa
DialConnection=PT_BOOLEAN,0x6717
; -- A boolean value indicating whether to dial the Exchange
; server or use the existing connection.
; If set to TRUE, Outlook will dial using the RAS profile choosen.
; If FALSE, Outlook will use the existing connection.
DomainName=PT_STRING8,0x67f0
Password=PT_BINARY,0x67f1
UserName=PT_STRING8,0x67f2
ConnectionName=PT_STRING8,0x6710
[Internet E-mail]
ServiceName=IMAIL
; When creating an Internet E-Mail service, both AccountName and
; LongAccountName MUST BE specified!
Account_Name=PT_STRING8,0x661f
; This should be exactly the same as the I_Mail AccountName
; property.
LongAccountName=PT_STRING8,0x3001
; This should be the "Internet E-mail - " + the AccountName
; property. For example, if AccountName="foo", then this
; should be "Internet E-mail - foo".
;AccountName=PT_STRING8,0x1235
; The name of the account that appears in the Account List.
ConnectionType=PT_DWORD,0x1239
; 0 = Connect using local area network (LAN).
; 1 = Connect using Internet Explorer's or a 3rd party dialer.
; 2 = Connect using modem and the Dial-up Networking connection
Connectoid=PT_STRING8,0x123A
POP3_Server=PT_STRING8,0x13C4
; Specifies the name of the POP3 server used for incoming messages.
POP3_User=PT_STRING8,0x0000
Email=PT_STRING8,0x0000
Display_Name=PT_STRING8,0x0000
POP3UseSicily=PT_BOOLEAN,0x13C8
; Set to 1 if you want to use Secure Password Authentication to logon
; to the POP3 server.
POP3LogonName=PT_STRING8,0x13C5
; If POP3UseSicily is turned on, this sets the name used to logon
; to the POP3 server.
POP3_Port=PT_DWORD,0x13C9
; Specfies the port number used to connect to the POP3 server.
POP3SSL=PT_BOOLEAN,0x13CA
; Set to 1 to use the SSL (Secure Sockets Layer) security protocal to
; connect to the POP3 server.
POP3TimeOut=PT_DWORD,0x13CB
; Specifies how long to wait for a response for the server before
; stopping to attempt to send or receive messages. Possible values:
; 30 = 30 seconds
; 60 = 1 minute
; 90 = 1 minute 30 seconds
; 120 = 2 minutes
; 150 = 2 minutes 30 seconds
; 180 = 3 minutes
; 210 = 3 minutes 30 seconds
; 240 = 4 minutes
; 270 = 4 minutes 30 seconds
; 300 = 5 minutes
POP3LeaveOnServer=PT_BOOLEAN,0x13CC
; Set to 1 to store a copy of all sent and received messages on the
; POP3 server.
POP3RemoveExpired=PT_BOOLEAN,0x13CE
; If POP3LeaveOnServer is turned on, set to 1 to delete messages on
; the server after a specific number of days (see also
; POP3ExpireDays).
POP3ExpireDays=PT_DWORD,0x13CF
; If POP3LeaveOnServer and POP3RemoveExpired are turned on, sets
; the number of days after which messages left on the server will
; be deleted.
POP3RemoveDeleted=PT_BOOLEAN,0x13CD
; This property is only supported on Outlook 98 (8.5)or higher! If
; you try to use it on Outlook 97 (8.0x) the account will not be
; created.
; If POP3LeaveOnServer is turned on, set to 1 to delete a message
; from the server when the message is deleted from the Deleted
; Items folder on the local machine.
SMTP_Server=PT_STRING8,0x1428
; Specifies the name of the SMTP server used for outcoming messages.
SMTPUseSicily=PT_DWORD,0x142C
; Values:
; 0 = No server authentication required.
; 1 = Use Secure Password Authentication, or set SMTP server logon
; name using SMTPLogonName.
SMTPLogonName=PT_STRING8,0x1429
; If SMTPUseSicily is set to 1, this sets the name used to logon to
; the SMTP server.
SMTPPort=PT_DWORD,0x142D
; Specfies the port number used to connect to the SMTP server.
SMTPSSL=PT_BOOLEAN,0x142E
; Set to 1 to use the SSL (Secure Sockets Layer) security protocal to
; connect to the SMTP server.
SMTPTimeOut=PT_DWORD,0x142F
; Specifies how long to wait for a response for the server before
; stopping to attempt to send or receive mail messages. Values are
; the same as POP3TimeOut.
SMTPDisplayName=PT_STRING8,0x1430
; Specifies the "friendly" name associated with the email address.
SMTPOrgName=PT_STRING8,0x1431
; Specifies the group or organization.
SMTPEmailAddress=PT_STRING8,0x1432
; Specifies the email address. Must be in the format name@company
SMTPReplyAddress=PT_STRING8,0x1433
; Specifies that replies to outgoing email should be sent to this
; email address.
SMTPSplitMessages=PT_BOOLEAN,0x1434
; This property is only supported on Outlook 98 (8.5) or higher! If
; you try to use it on Outlook 97 (8.0x) the account will not be
; created.
; Set to 1 to break up outgoing messages, so that each message is
; smaller than the file size indicated by SMTPSplitSize.
SMTPSplitSize=PT_DWORD,0x1435
; The maximum size, in KB, of a piece of a split message.
[IMAP E-mail]
ServiceName=IMAP
Account_Name=PT_STRING8,0x661f
IMAP_Server=PT_STRING8,0x13C4
IMAP_User=PT_STRING8,0x0000
Email=PT_STRING8,0x0000
Display_Name=PT_STRING8,0x0000
SMTP_Server=PT_STRING8,0x1428
[Service5]
PathToPersonalAddressBook=%PROFILE%\Outlook\%USERNAME%.pab
ViewOrder=1
[Service6]
PathToPersonalFolders=%PROFILE%\Outlook\%USERNAME%.pst
[IMAPService1]
Account_Name=test Voyager
Email=test@test.net
IMAP_User=test
Display_Name=test Voyager
IMAP_Server=192.168.1.210
SMTP_Server=192.168.1.210
[Signature]
Name=My Signature
Line1=E-Mail messages to test may be monitored or disclosed pursuant to company policy.